Contact Email
Support Phone Number
Contact Email
Support Phone Number
The 1010-18 is a StarModul intermediate ridge connector for 10×10 cm square tube. It joins the two sloping beams of a gable roof at the highest point and continues the ridge beam. It is bolted on, without welding, and includes the Screws.
It is installed on the intermediate frames of a gable roof. The 10×10 cm tube is used in larger or higher-load structures: garages, large porches, roofs and home extensions. See the 3D viewer on this page to view the exact shape of the part.
Fit the tubes into the connector, check the corner bracket and bolt it. No welding or special machinery is needed, so the structure is assembled directly on site. For this connector you need 10×10 cm 2 mm galvanised steel tube or 10×10 cm 3 mm tube; we can send it cut to size.
This connector is part of: Structure – 6 x 3 Metres – 2 Slopes – Posts (10×10 cm Tube).
See also: all connectors for 10×10 cm tube with flanges and the 3D structure configurator, which calculates the connectors and tubes for your project.
Yes. Each connector is supplied with its Screws.
No. The entire StarModul system is bolted, so it can be assembled and disassembled without welding.
With stock, 2–3 days in Catalonia and Aragon and 7–8 days in the rest of Spain. Without stock, 2–3 weeks.
Yes. We work to measure and can send you the complete kit: connectors, cut-to-size tubes, façade and roof panels, trims and Screws. Request a quote.
| Weight | 4 kg |
|---|---|
| Measurement | 10×10 cm |
32,11€ (excl. VAT)
Explore the interactive model to view the product’s geometry and configuration from different angles.
With the StarModul 3D steel structure configurator, you can define the dimensions, geometry, and initial configuration of a structure using our bolted connection system.
The tool generates a preliminary list of the necessary joints, a quantity takeoff for pipes and profiles, and an initial assessment of the configured components.