Contact Email
Support Phone Number
Contact Email
Support Phone Number
The 1010-03D is a right L-joint with slope StarModul for 10×10 cm square tube. Corner piece that joins the post with a horizontal beam and with the sloped roof beam. It is the right-hand version of the piece; the other hand is sold separately. It is assembled bolted, without welding, and includes the hardware.
It is used in the corners of single-slope roofs and porches. The 10×10 cm tube is used in larger structures or higher loads: garages, large porches, roofs and home extensions. View the 3D viewer on this page to see the exact shape of the piece.
Fit the tubes into the piece, check the corner bracket, and screw it in place. No welding or special machinery is needed, so the structure can be assembled directly on site. For this connector you will need 2 mm 10×10 cm galvanized steel tube or 3 mm 10×10 cm tube; we can ship it cut to size.
This piece is part of: Structure – 3 x 3 Metres – 1 Slope – Posts (10×10 cm Tube), Porch – 3 x 3 Metres – 1 Slope – Posts (10×10 Tube), Structure – 6 x 3 Metres – 2 Slopes – Posts (10×10 cm Tube).
See also: all connectors with flanges for 10×10 cm tube and the 3D structure configurator, which calculates the connectors and tubes for your project.
Yes. Each joint is delivered with its screws.
No. The entire StarModul system is screw-mounted, so it can be assembled and disassembled without welding.
With stock, 2–3 days in Catalonia and Aragon and 7–8 days in the rest of Spain. Without stock, 2–3 weeks.
Yes. We work to measure and can send you the complete kit: joints, cut tubes, facade and roof panels, trims, and screws. Request a quote.
| Weight | 4 kg |
|---|---|
| Measurement | 10×10 cm |
34,94€ (excl. VAT)
Explore the interactive model to view the product’s geometry and configuration from different angles.
With the StarModul 3D steel structure configurator, you can define the dimensions, geometry, and initial configuration of a structure using our bolted connection system.
The tool generates a preliminary list of the necessary joints, a quantity takeoff for pipes and profiles, and an initial assessment of the configured components.