Contact Email
Support Phone Number
Contact Email
Support Phone Number
The 0055-03D is a right L-joint with StarModul slope for 5×5 cm square tube. A corner piece that connects the post to a horizontal beam and to the sloped roof beam. It is the right-hand version of the piece; the other side is sold separately. It is assembled with bolts, without welding, and comes with the hardware included.
It is used on the corners of single-slope roofs and porches. It is the most common size for pergolas, porches, gazebos, and lightweight self-assembly structures. Check out the 3D viewer on this page to see the exact shape of the piece.
Fit the tubes into the piece, check the corner bracket, and bolt it together. No welding or special machinery is needed, so the structure can be assembled directly on site. For this joint you need 5×5 cm galvanized steel tube (1.5 mm thick); we can ship it cut to size.
This piece is part of: Structure – 3 x 3 Meters – 1 Slope – Posts (5×5 cm Tube), Porch – 3 x 3 Meters – 1 Slope – Posts (5×5 Tube), Structure – 6 x 3 Meters – 2 Slopes – Posts (5×5 cm Tube).
See also: all joints for 5×5 cm tube with flanges and the 3D structure configurator, which calculates the joints and tubes for your project.
Yes. Each joint is delivered with its screws.
No. The entire StarModul system is screw-mounted, so it can be assembled and disassembled without welding.
With stock, 2–3 days in Catalonia and Aragon and 7–8 days in the rest of Spain. Without stock, 2–3 weeks.
Yes. We work to measure and can send you the complete kit: joints, cut tubes, facade and roof panels, trims, and screws. Request a quote.
| Weight | 2 kg |
|---|---|
| Measurement | 5×5 cm |
12,04€ (excl. VAT)
Explore the interactive model to view the product’s geometry and configuration from different angles.
With the StarModul 3D steel structure configurator, you can define the dimensions, geometry, and initial configuration of a structure using our bolted connection system.
The tool generates a preliminary list of the necessary joints, a quantity takeoff for pipes and profiles, and an initial assessment of the configured components.